Choosing and Installing a Projector in your Home or Apartment: Things to Keep in Mind

What do I need to know before buying a projector?  

  • I do not know if you buy a projector or a TV great. What is better?
  •  I want to know what to take into account when buying a projector.
  • How can I install a projector at home?

If you, dear reader, have the idea that the projectors are a business exclusivity and education center; You are completely wrong, as companies make a lot of profit from the home projector.

Leaving aside the business of this sector; then we will give you a few tips so you can decide better if you want a projector or not and, importantly, how it should be installed.

 Tips for Choosing a Projector

Surely you have doubts about whether it is better to buy a good TV or a projector, and what features should have the projector that you want to put in your home. Here you will find two basic guide tips so you can make this decision:

TV or Projector?

If you’re a movie buff and would like to have a comparable sensation that you have in the room a cinema, a projector is the higher quality option . As indicated in this article from Engadget , from 46 inches the value is better compared to a television screen.

In any case, you have to keep in mind that maintenance must be continuous: check the lamps, take care of the projection screen or take into account the luminosity in relation to the apartment where it is installed.

Full HD

Now, for those people who do not have enough knowledge on projectors, what model can be recommended? Buy a projector Full HD is a good choice; In addition, the projection distance of many domestic models allows a smaller margin: two meters between the projector and the screen may be sufficient to see a good projection (around 80 inches as standard).

Tips for Installing a Projector

Do you have to take into account when installing a projector? Here are several tips for you, once chosen the one that best suits your needs, you can install easily the project taking into account all the factors necessary for your perfect viewing. Let’s go there:

 Minimize the light of the environment

To install a projector, the first thing to keep in mind is the brightness of the room of the floor or house. Try to minimize the ambient light (remove it, for obvious reasons, it is almost impossible). You should look for a room wide enough so that it can be used without problem and handle the daylight filter, lowering the blinds or closing the door, for example.

   You may not need a screen

The living room of home is usually the chosen location, since its amplitude invites to place a screen of projection. Depending on the consumption and characteristics of the space you can opt for a fixed or motorized installation (the latter very reasonable and usual). But in many homes  you can take advantage of the white walls -impolutas- to focus the projection.

 You can hang it, but it is not essential

Installation is feared in many homes, but no longer a myth. What you have to be clear is where you place the projector, as well as the margin space left in the room for projection. The device does not have to be hung, can be placed without problem on a table with the condition of being the same level as the screen where the images will be captured. Even so, if you decide to hang it from the ceiling so that it does not take place, the support must be strong enough. If you prefer this second option, it is best to consult the projector store for the necessary mounting tools for a particular model or brand.

Eye with cables

The wiring must be hooked up to the power supply area of the projector. In this sense, it is advisable to use a cable HDMI for connecting the device to a player, satellite TV receiver or computer.

In any case, whether you decide to hang the projector and put it on a table, you must meet one condition: the cables must be protected . On the floor and cutlery if the appliance is placed on a table; Or through the wall if you opt for a ceiling mount.

 Set it well before

Finally, never forget to do some testing with the device before exploding its features: look regulating the focus the lens, align the image with zoom and video sources (TV, receiver, PC) are optimal.

For example, in the case of computers you have to look at the output jack: if it is an HDMI (better resolution and usual in recent computers) or a classic VGA if the model is not recent (poorer quality). Visit for more information.